Posts tagged equipment for sale

May 7, 2017

Used Scrap Metal Ferrous Shredding System for Sale

Tom Stanek

An effective energy efficient metal shredding line up

Update: This unit has been sold  

5000 HP Ferrous Scrap Metal Shredding System for sale.  The heavy duty shredder box is 88 x 101 inch with 4 inch thick walls.  This is a complete package with infeed conveyor, ferrous line, motors, pumps, water injection, and coolers.  Many extras such as power systems and a computer managed over sized double feed roll allow this machine to shred serious volume in a compact package.  150 tons per hour ferrous out production.

The primary drive is a 5000 HP (3730 KW) A/C Wound Rotor Motor.  The hard charging Schorch motor keeps churning day after day.  Dual axial pole magnets, cyclone air cleaning system, and split picking station allow for extremely clean and dense ferrous scrap.

Slip Power Recovery Drive is included.  Motor rotor current is managed in a switchable duel system using either liquid rheostat or solid state SPR drive.  The SPR efficiently runs the motor with greater power, cooler temperatures, more tons per hour, while allowing less flicker and inference with local electrical grid, thus greater options for relocating the installation.  Comes with heavy duty GE transformer (25kV/4160), power factor capacitors, and many extras that take the added cost out of relocating the machine.

The system includes infeed conveyor, shredder dampening springs, under mill oscillator, conveyors, magnets, water injection system, de-dusting air cleaning zee box, dual picking station, stacking conveyor, and non-ferrous radial stacking conveyor.  Many spare casting wear parts and spare parts are available.  The motor room is protected by an air filtration system.  Roof mounted coolers, control cabin, infra red camera, and shredder management computer round out the system.  Non-ferrous separation system as NOT part of this package.

An effective and energy efficient equipment line up.  A very complete system, well cared for with low tons on the machine.   This unit represent an excellent opportunity for a new installation or if you are looking to replace an aging shredding plant.

Spare motor and rotor available as extras.

Contact us at k2.castings.com for more details.  Serious inquires only.

 

February 12, 2017

Rebuilt Hagglunds MB 283 Drive Motor Available

Tom Stanek

Many of our customers continue to run the venerable, long lasting MB series hydraulic drive motors with their shredding installations.  Infeed conveyors and double feed roll drives are commonly powered by the MB 283.

As you know, Hagglunds is now part of Bosch Rexroth and the MB series is no longer in production.  The CA series of radial piston motors is the current supply in many new shredder installations.  If you want a new motor, it will be a CA or CB series.  Replacing an older MB with a new CA requires adapters and a little conversion.

Fortunately, the well made Hagglunds units are tough.  Units can be rebuilt with new parts.  You just have to find them!   One of our shops has one.

The unit is rebuilt with new parts including a new roll pin, cyinder roll bearing, wear ring, gasket set, radial lip seal dust seal, and piston ring.  Its been tested and is backed by a 6 month shop warranty.

Why wait for new or go through a conversion?  Get this in your spares inventory.  Grab it while you can.  Contact us for details.

April 7, 2015

Used 98104 Auto Shredder for Sale

Tom Stanek

We have a customer with a used scrap metal auto shredder for sale.  The unit is a model 98104 Texas Shredder, 4000 HP, disk rotor, with infeed and ferrous downstream. Rated output is 100 tons per hour.

If you’re looking for a cost effective way into shredding, you found the right package. High output, solid key components, lots of extras. One of the most common shredder designs means parts are common as well.

  • System has new and overhauled parts.
  • Downstream consists of ferrous cleaning system only.
  • The Alstom 4000 HP wound rotor AC motor is in excellent condition.
  • Includes a very nice portable modular indoor substation for power distribution & receiving utility power, with a metering bay and disconnects.

u-jointsIncludes many extras needed to install and operate, typically not part of used auto shredding packages.  Contact us for details.  This system is located in the USA.

This unit processes automobiles, end of life vehicles (ELV), appliances, sheet metal, baled ferrous, and loose tin.

 

February 15, 2014

Scrap Metal Shredder for Sale

Tom Stanek

European manufacturer, 2.7 x 2.2 meter (87 x 106 inches)

  • New shredder, ready for delivery with 60 days notice.  
  • Rated power 2500 to 4000 horsepower
  • 70-95 metric tons per hour ferrous output at 3000 HP (2200 KW)
  • Shreds automobiles (end of life vehicles ELV), appliances, #2 HMS, baled sheet metal

ShredderSketch

Equipment includes the following components and subsystems: 

  • Infeed conveyor system
  • Feed Chute, Shredder Box, Double Feed Roll system
  • Springs for vibration damping
  • Shredder Rotor (capped disk with bearings & housings; barrel rotor)
  • Shredder Drive Turbo Coupling system
  • Drive shaft and couplings
  • Under Mill (shredder) Oscillating (vibrating) Conveyor
  • Pin Puller System with Platform
  • Shredder Hydraulic System
  • Very Heavy Duty, Welded Plate Construction
  • Top & Bottom discharge, reject door
  • Rotor Hydraulic Lift provides clear access to bottom grates
  • Hydraulic box clamp & rotor bearing clamps
  • Rotor Brake
  • Fully capped barrel style rotor has extensive service life

Scrap Metal Shredder with Rotor Elevator
Options

  • 2nd shredder barrel rotor for spare
  • Motor purchase is an option, if a drive system is needed for short delivery

 Price:     Offered by K2 Castings on behalf of the owner, serious inquiry only

February 11, 2013

Scrap Metal Auto Shredder for Sale

Tom Stanek

98104 Texas Shredder, 4000 HP, disk rotor, infeed and downstream. 100 tons per hour output. 

If you’re looking for a cost effective way into shredding, you found the right package. High output, solid key components, lots of extras. One of the most common shredder designs means parts are common as well.

System has new and overhauled parts. New Non-ferrous separation system available separately or as part of the shredder package. 

Portable / Modular Indoor substation power distribution center & switch center to receive utility power, metering bay, and disconnects. 

Includes many extras needed to install and operate, typically not part of used shredding packages.  Call for details.

u-joints

October 8, 2011

Shredder Motor Transformer for Sale

Tom Stanek
  • 10 MVA Westinghouse Low Impedance Transformer
  • Sized  for a 4000-6000 HP shredder drive
  • 12,470 V primary to 4160 secondary, Delta Wye
  • Extras such as multiple taps, current transformers, liquid level gauge, pressure vac gauge, others.

Available for immediate installation or purchase as a backup spare.

Call for details.